Global BIM Centre of Excellence 國際BIM研究院

201810103

BIM 型建香港&英國特許土木工程測量師學會聯合CPD研討會-BIM掃描成功举行

Rate this item
(0 votes)

 

1

11“buildingSMART& Chartered ICES joint CPD Workshop Seminar – Scan to BIM” had beensuccessfully held on 30th June, 2016 at CIC Kowloon Bay Training Centre –BIM Innovation and Development Centre. It was organized by buildingSMART Hong Kong (bSHK) and CharteredInstitution of Civil Engineering Surveyors (ICES). 30 attendees including bSHKmembers and ICES members who active in the construction industry attended the seminar.  

型建香港&英國特許土木工程測量師學會聯合CPD研討會-BIM掃描於2016年6月30日在香港建造業議會九龍灣訓練中心-BIM創新發展中心成功舉行。此次研討會由型建香港(bSHK)和英國特許土木工程測量師學會(ICES)共同舉辦。30位出席者包括活躍在行業內的bSHK會員和ICES會員參加了此次論壇。

2

From left side:Mr. Jack Cheng,Sr Miranda Lui and Mr Kelvin Kuo   The seminar kicked off by the welcome speech presented by SrMiranda Lui – The Chairlady of ICES, followed by an introduction of BIM made byMr. Kelvin Kuo, who istheBIM Sub-Committee Vice-Chairman ofICES, which indicated the beginning of presentations by the speakers.Mr.Kelvin Kuo also delivered his talk with some BIM case sharing.  

研討會由ICES會長呂靜儀女士的歡迎致辭拉開序幕,接著就是ICES的建築資訊模擬(BIM)分部副主席郭峰先生對BIM作了詳細介紹,也由此開始了演講嘉賓的演講部分。郭峰先生在他的演講部分也分享了幾個關於BIM的案例。

456

From left side: Ms Joyce Hung, Sr Miranda Lui, Mr AndyChan

The second speaker was Ms. Joyce Hung, a sales manager of SigmaMascot (H.K.) Limited, she introduced two different kinds of 3D Laser Scanners. One isTerrestrial Laser Scanner; another one is Mobile Handheld Laser Scanner. She also shared data capturing case with demonstration.  

第二位演講嘉賓是來自于Sigma Mascot香港有限公司的Joyce Hung 小姐,她介紹了兩款不同的3D鐳射掃描儀器,一個是地面激光掃描儀,另外一個是掌上移動激光掃描儀。她還現場演示了數據採集。

7

After the seminar, Sr Miranda Lui presented appreciation certificate to Ms Joyce Hu ng, for her brilliant speech.

研討會之後,呂靜儀女士頒發感謝證書給Joyce Hung 小姐,表示對她精彩演講的感謝。

8

Live demonstration with participant.

與現場參會人員的互動演示。

13

Mr. Andy Chan from Sigma Mascot (H.K.) Ltd presented his talk.

來自Sigma Mascot香港有限公司的Andy Chan 先生發表他的演講

The third speaker wasMr. Andy Chan. He introduced how to create BIM Model and using scanned data inAutodesk Revit. Having use of the advance Autodesk Revit Plug-in “PointSensefor revit”, it automatically fitting and align walls.  

第三位演講嘉賓是Andy Chan先生.他介紹了如何建立BIM模型和在Autodesk Revit利用掃面到的數據。還有介紹利用Autodesk Revit中先进的插件“PointSense for revit”的,它会自动装配和对准墙壁。

910

 

Theseminar lasted for 3 hours with multiple sessions, including speeches, Q&Asession, live demonstration which facilitated technical communication andinteraction among participants, promoted business cooperation and evenpartnership.     

研討會大約進行了3個小時,並且有多個環節包括演講,提問和現場互動演示等等。不僅促進了行業上的技術交流和參會人員互動,而且也有利發展合作機會甚至合夥關係。

来源:MES

Read 1116 times

Hong Kong

Address: Unit A, 16/F, Nathan Commercial Building, No.430 Nathan Road, Yaumatei, Kowloon, Hong Kong Tel:+852 3188 5230
M+852 3188 5230 / +86 131 4389 5956

Guangzhou

Address: No. 104, Building 18, Giant Creative Industry Park, Shibei Industry Road, No.644 of Dashi Street, Panyu, Guangzhou, China Tel:20-39177093

 

>  About CoE

>  Join ICES China Region

>  Join CoE

>  Email:admin@global-bim.org

©2015 Global BIM All Rights Reserved 粤ICP备16007449号-1